Skip to main content

 

Update the DNS assignment for VMware Aria Automation


An administrator can update the DNS assignments for VMware Aria Automation.

Procedure

  1. Log in to the console for any VMware Aria Automation appliance using either SSH or VMRC.
  2. Run the following command.
    vracli network dns set --servers DNS1,DNS2
  3. Verify that the new DNS servers were properly applied to all VMware Aria Automation nodes with vracli network dns status command.
  4. Run the following set of commands to shut down the VMware Aria Automation services on all cluster nodes.

    For related information about shutting down VMware Aria Automation, see Starting and stopping VMware Aria Automation.

    /opt/scripts/svc-stop.sh
sleep 120
/opt/scripts/deploy.sh --onlyClean
  5. Restart the VMware Aria Automation nodes and wait for them to start completely.

    For related information about restarting VMware Aria Automation, see Starting and stopping VMware Aria Automation.

  6. Log in to each VMware Aria Automation node with SSH and verify that the new DNS servers are listed in /etc/resolv.conf.
  7. On one of the VMware Aria Automation nodes, run the following command to start the VMware Aria Automation services: /opt/scripts/deploy.sh
Labels:

Comments

Post a Comment

Popular posts from this blog

Step-by-Step Explanation of Ballooning, Compression & Swapping in VMware

 ðŸ”¹ Step-by-Step Explanation of Ballooning, Compression & Swapping in VMware ⸻ 1️⃣ Memory Ballooning (vmmemctl) Ballooning is the first memory reclamation technique used when ESXi detects memory pressure. ➤ Step-by-Step: How Ballooning Works  1. VMware Tools installs the balloon driver (vmmemctl) inside the guest OS.  2. ESXi detects low free memory on the host.  3. ESXi inflates the balloon in selected VMs.  4. Balloon driver occupies guest memory, making the OS think RAM is full.  5. Guest OS frees idle / unused pages (because it believes memory is needed).  6. ESXi reclaims those freed pages and makes them available to other VMs. Why Ballooning Happens?  • Host free memory is very low.  • ESXi wants the VM to release unused pages before resorting to swapping. Example  • Host memory: 64 GB  • VMs used: 62 GB  • Free: 2 GB → ESXi triggers ballooning  • VM1 (8 GB RAM): Balloon inflates to 2 GB → OS frees 2 GB → ESXi re...
Post a Comment
Read more

ESXi Host Troubleshooting Checklist

  🛠️ ESXi Host Troubleshooting Checklist (With Complete Log Locations) ✅ 1. Host Status & Connectivity Check host state in vCenter (Connected / Not Responding / Disconnected) Review CPU, RAM, and datastore usage Validate HA/DRS recommendations ✅ 2. Hardware Health Monitor hardware sensors (CPU, DIMMs, fans, PSU, RAID) Check RAID controller logs via vendor tools View hardware status in: vCenter → Monitor → Hardware Health DCUI → Hardware Status ✅ 3. Network Validation Verify vSwitches, Port Groups, NIC teaming, VLAN tagging Check vmkernel ports (mgmt, vMotion, iSCSI, vSAN) Test reachability using: Shell vmkping < IP > Show more lines Validate physical NIC status and link speed ✅ 4. Storage & Datastore Checks Confirm datastore accessibility Rescan storage adapters (iSCSI/FC/NFS) Validate multipathing (Round Robin / Fixed / MRU) Check datastore latency with esxtop ✅ **5. Critical Logs & Their Locations (Full List) Here are key ESXi log files that every VMware adm...
Post a Comment
Read more

Quick Guide to VCF Automation for VCD Administrators

  Quick Guide to VCF Automation for VCD Administrators VMware Cloud Foundation 9 (VCF 9) has been  released  and with it comes brand new Cloud Management Platform –  VCF Automation (VCFA)  which supercedes both Aria Automation and VMware Cloud Director (VCD). This blog post is intended for those people that know VCD quite well and want to understand how is VCFA similar or different to help them quickly orient in the new direction. It should be emphasized that VCFA is a new solution and not just rebranding of an old one. However it reuses a lot of components from its predecessors. The provider part of VCFA called Tenenat Manager is based on VCD code and the UI and APIs will be familiar to VCD admins, while the tenant part inherist a lot from Aria Automation and especially for VCD end-users will look brand new. Deployment and Architecture VCFA is generaly deployed from VCF Operations Fleet Management (former Aria Suite LCM embeded in VCF Ops. Fleet Management...
Post a Comment
Read more